What does 10 units of KLOW blend hold at each water volume?
A blend dissolves every component into the same water, so each component's concentration is its own milligrams divided by the shared volume. The table uses the common label split (GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg, KPV 10 mg); if your label differs, edit the components in the calculator above.
| Water | GHK-Cu | BPC-157 | TB-500 | KPV | Total |
|---|---|---|---|---|---|
| 2 mL | 2.5 | 0.5 | 0.5 | 0.5 | 4 |
| 3 mL | 1.67 | 0.333 | 0.333 | 0.333 | 2.67 |
| 4 mL | 1.25 | 0.25 | 0.25 | 0.25 | 2 |
| 5 mL | 1 | 0.2 | 0.2 | 0.2 | 1.6 |
Worked example
- Total concentration. 80 mg ÷ 4 mL = 20 mg/mL.
- GHK-Cu. 50 mg ÷ 4 mL = 12.5 mg/mL → in 0.1 mL (10 units): 1.25 mg (1,250 mcg).
- BPC-157. 10 mg ÷ 4 mL = 2.5 mg/mL → in 0.1 mL (10 units): 0.25 mg (250 mcg).
- TB-500. 10 mg ÷ 4 mL = 2.5 mg/mL → in 0.1 mL (10 units): 0.25 mg (250 mcg).
- KPV. 10 mg ÷ 4 mL = 2.5 mg/mL → in 0.1 mL (10 units): 0.25 mg (250 mcg).
- Check. The components add up to 2 mg, which is 20 mg/mL × 0.1 mL, as it should.
To target one component, divide its target mg by its own concentration and multiply by 100. Everything else in the vial comes along in the fixed ratio. The general blend calculator accepts any number of components.
KLOW blend: notes for the arithmetic
The usual label is GHK-Cu 50 mg + BPC-157 10 mg + TB-500 10 mg + KPV 10 mg (80 mg total), but check your vial: the split determines how much of each component a draw contains. Edit the component amounts in the calculator if yours differ.
For the lab procedure itself (materials, aseptic technique, mixing without foaming) see how to reconstitute peptides. For what bacteriostatic water is and how long an opened vial is kept, see the bacteriostatic water guide and the storage guide.
Frequently asked questions
How much of each component is in 10 units of KLOW blend?
With the 80 mg vial in 4 mL, 10 units (0.1 mL) contains 1.25 mg GHK-Cu, 0.25 mg BPC-157, 0.25 mg TB-500, 0.25 mg KPV. Every reading carries the components in the label ratio; change the water and all of them change together.
How much bacteriostatic water for a 80 mg KLOW blend vial?
It is a choice, not a fixed number. 2 mL gives 40 mg/mL total; 3 mL gives 26.67 mg/mL total; 4 mL gives 20 mg/mL total; 5 mL gives 16 mg/mL total. Larger volumes make each unit hold less, which makes small readings easier to measure but needs a vial that physically holds the volume.
Can I calculate KLOW blend by one component only?
Yes. Pick the component you are tracking, divide its mg by the water volume to get its own concentration, then convert as usual. The blend calculator shows all components at once so you can see what else each draw contains.
Is this a KLOW blend dosing guide?
No. Peptide Vial Math only does the unit arithmetic for a vial you already have. It does not recommend any amount or schedule, and multi-compound research blends are not approved for human use.
Sources
Links checked 2026-10-19.